VEVOR DIY Series——Stand Airless Paint Sprayer
Powder coating is widely used in home appliances, hardware, security doors, heat sinks, construction, auto parts, sports equipment, medical equipment, aluminum, and other industries. All the reach and quality you could ask for are right here. Get the job done right with VEVOR
Q: How to setup?
A: First, connect hose to gun. Remove red cap, connect hose to sprayer. Securely tighten. Second, turn gun trigger lock to locked position. Unthread spray tip and guard assembly. Third, turn Pressure Control Knob to lowest setting.
Q: How to start flushing?
A: Turn Power Switch OFF and plug sprayer into the grounded outlet. Separate small. Clear drain tube from large suction tube and place into waste pail. Submerge suction tube in water if spraying water-based material or flushing fluid if spraying oil-based. With the Prime/Spray Valve down to PRIME, turn Pressure Control Knob to Prime/Clean setting. Turn Power Switch ON. Allow fluid to flow out drain tube for 30-60 seconds. Turn Power Switch OFF.
Q: Storage fluid?
A: Remove Power Flush attachment from suction tube and Submerge suction tube. Turn Prime/Spray Valve down to PRIME. Turn Power Switch ON. Turn Pressure Control Knob to Prime/Clean setting. When Pump Armor comes out of drain tube, turn Pressure Control Knob to lowest setting and Power Switch OFF. Tum Prime/Spray Valve to SPRAY and install inlet strainer on suction tube for storage.