Are you struggling to cut like a hot knife on your hard clay soil to avoid ruining your post-hole digger? Here, The VEVOR Monthly DIY Project Teams share some of the best Jackhammer bits for your next demolition project. The products mentioned in this article are available on online retailers like Amazon, various home improvement stores, and local home centers.
Read on about the best jackhammer bits to break the hard clay and giant concrete chunks buried under the clay. The hard, dense clay and large concrete chunks can be troublesome if you decide to dig a trench or transform your garden into a pleasant space of grass, trees, and shrubbery. But the question is how to deal with this situation. Breaking concrete is always a challenging job. You might face a serious injury by using the hand truck or sledgehammer to move the giant concrete or dig the hole.
Now you don’t need to worry because jackhammer bits are worth buying that precisely fit into your rotatory power drill to get the job done easily and fastly.
What Are Jack Hammer Bits?
Jackhammer bits are durable enough to assist you with all kinds of digging jobs. The bits are made of high-quality material to endure high-intensity work environments. Jackhammer bits are specially made up to facilitate you with digging and trenching through clay, gravel, concrete, and similar materials for gardening and home improvement.
There are different types of Jackhammer bits that you should carefully choose before buying. Some features are essential to consider before buying. Durability is worth considering as you specifically needed it for digging and trenching.
These products are not cheap, so it’s important to ensure cost-effectiveness before investing in them. The durability of jackhammer bits relies on compatibility and the type of material used to allow working a tough job.
Steel and sharp blades are commonly used to make Jack Hammer bits. They’re strong enough to efficiently improve your work quality and save you a lot of time.
Some jackhammer bits are of high voltage, and some are low. However, only a few of them are sharper and slimmer that don’t take much time to grind or to dig a small trench in frozen ground. So, there’s a chance of fracturing at the transition between shaft and spade during the second use.
Rugged constructive jackhammer bits have high durability and go along for years. Therefore, it’s necessary to ensure the jackhammer you’re buying is capable of grinding all six sides smoothly.
List of Top 5 Jack Hammer Bits for Digging
In this review, I provide an overview of the best top 5 jackhammer bits to give you a sense of the quality products that can simplify and effectively for your next drilling job.
Best Over All: VEVOR 17.1 x 5.3 Clay Spade Chisel Heavy Duty Electric Jack Hammer Bits
Best Speed: NEIKO 18.11 x 5.67 Hex Shank Shovel Spade Chisel Bits for Demolition
Best Price: BOSCH HS1922 4-1/2″ x 17″ Clay Spade SDS-Max shank
Best Handling: DEWALT Breaker Hammer Bit, Clay Spade, Hex, 20-Inch x 1-1/8-Inch
Best Mobility: XtremepowerUS 5/8″ Flat Concrete Chisels Hex-Shank Chisel Jack Hammer Bits
1- VEVOR 17.1 x 5.3 Clay Spade Chisel Heavy Duty Electric Jack Hammer Bits
Durability and price are the most important factors to consider for quality work when buying jackhammer bits. VEVOR jackhammer bits are durable after being crafted from 40 Cr steel. They’re well-built to ensure strong wear resistance and shock absorption. VEVOR Chisel spades help to dig a large-scale area with efficiency. This heavy-duty clay spade performs numerous functions like digging through concrete and packed soil and plowing and slicing through thick turf.
These products came with instructions on how to use them, so you can use them hazel-free. It makes your work more easier as locking pins attachments are easy to manage, while extra-long 17.5-inch extended arms don’t allow you to bend down more to do a job if you’re over age and suffering from Shoulder and Chronic pain issues. This comfortable product allows you to reach all six sides and perform the best grinding job.
This horse spade tool satisfied many customers after precisely fitting into their rotatory power drill with a 1-1/8 hexagon shank. Jackhammer bits’ sharp, unique blade design and structure save a lot of time.
Its portable molding box is easy to carry and designed with comfortable handles that allow convenient transportation and storage. This spade is made of thick steel to dig plenty of deep holes and is incredible for foundation trenching if you want a clean square trench.
Furthermore, this product is user-friendly, so even 14-year-old kids enjoy using this. Among more than 10 million members around the globe, VEVOR jackhammer bits are one of the most versatile tools.
• Material: 40 Cr Steel
• Model: VV-CS-LJJC
• Item Weight: 5.62lb/2.55 kg
• Item Size(L x W): 17.1″ x 5.3″/43.5 x 13.5 cm
• Case Size: 19.7″ x 7.09″/50 x 18 cm
• Shank: 1-1/8″ Hexagon
• High Durability
• Best Price
• Easy To Carry
• User-Friendly Design
• Easy To Operate & Install
• Good Compatibility
• Stable- Structure
• Flipping the bit over and using the other side helps
2- NEIKO 18.11 x 5.67 Hex Shank Shovel Spade Chisel Bits for Demolition
NEIKO jackhammer bit is perfect for small gardens and backyard landscaping. It allows you to dig through concrete, packed soil, frozen dirt, and more.
Due to its alloy steel design, you can cut through hard surfaces. Its 5-1/2″ wide and rounded structure is helpful for quick work.
Due to its bigger diameter, you can face inconvenience in fitting it, and it doesn’t allow you to grind in all directions and can be snapped in half, digging in the dirt. But its high speed is remarkable to save up your much time.
• Material: Alloy steel
• Item Dimension: 18.11 x 5.67 x 1.42 inches
• Item weight: 0.01 ounces
• Item size: 1 Pc – Spade Chisel Bit
• Best Price
• Stable Structure
• Fast Speed
• Easy operate
• Don’t allow you to grind in all directions
• Not a perfect fit
3- BOSCH HS1922 4-1/2″ x 17″ Clay Spade SDS-Max Shank
Bosch jackhammer bits are full assortments of chisels and hammer steel points. Increasing efficiency and higher durability bring innovation to concrete and masonry drilling. These bits are manufactured with a proprietary heat-treat process.
Even though digging holes is not a laborious task anymore with its well-built digging spade, it’s very efficient. However, it’s not suitable to dig hard rocks but is mostly used for digging holes in clay, loam, soil, or light rocks.
• Item Dimension: 17 x 4.5 x 17 inches
• Size: 17 In
• Weight: 3 pounds
• Material: Steel
• Easy To Use
• Fast Speed
• Excellent Quality
• Extra Long Handle
• Dulls Fastly
• Fitting Issue
4- DEWALT Breaker Hammer Bit, Clay Spade, Hex, 20-Inch x 1-1/8-Inch
DEWALT jackhammer bits are made of a hardened steel body with 20 inches long length. It works great digging an oil change pit in clay with small embedded rocks.
As it’s 20-Inch x 1-1/8-Inch, you can’t easily fit it in your device. If we compare it to its price, it takes a lot of time to dig. These jackhammer bits are also non-durable.
• Material: Metal
• Item Dimension: 17x
• Shank Type: SDS-Max
• Finish Type: Steel
• Long Handle
• Good for small rocks
• Well Designed
• Time Taken
• Not recommended for large area
5- XtremepowerUS 5/8″ Moil Point and Flat Concrete Chisels for Electric Demolition Jack Hammer
Jackhammer bits are designed to drill through concrete and dig holes for backyard and garden landscaping. It’s an 11-inch long and flat chisel, so suitable for TR industrial jackhammers. It’s trouble-free to poop up tiles and enables you to make an accurate flat grade while digging plumbing trenches.
This product is less in weight and does work efficiently on flat surfaces effortlessly but is not suitable for hard surfaces compared to its relatively high price.
• Material: Steel
• Weight: 1.67 pounds
• Dimension: 11.25 x 2 x 2 inches
• Easy To Use
• Light Weight
• Long flat chisel
• Not Good For Hard Surfaces
Different Types of Jack Hammer Bits
For demolishing, a jackhammer is the best tool to be considered. It’s used for cutting, breaking, lifting, and removing tough concrete. But if you’re planning to work on concrete, it’s crucial to know the different types of jackhammer bits and their functions.
Some of the best types of jackhammer bits are as follows:
• Pointed Bit or Moil Point Bit
• Chisel Bits
• Spade Bits
• Asphalt Cutter Bit
• Scoop Shovel Chisel Bits
What Should You Look for When Buying a Jackhammer Bits
Some jackhammer bits are the best for digging and landscaping, while some are suitable as asphalt cutters for roads and pavements. Make sure the shank should fit in your specific jackhammer shank sizes.
A jackhammer bit’s diameter should be between 1 and 1/8 inches and be made of heavy-duty steel before purchasing it. On the other hand, the bits should be between 1 1/4 inches and 7/8 inches in diameter for breaking thick concrete.
Are Jack Hammers Bits Worth Buying
Yes, it’s worth buying if you’re living under the Arizona sun or where the dirt hardens the soil, with 70% of the rocks in the property. If you’re a nature lover and want to plant fruit trees, then putting in a fence post is hard to do in these places. Then a tall hammer is the only way to do this easily.
With the help of these jackhammer bits, your spouse can dig the stabilizing foot for your hoop house and effortlessly plant a tress. Having these hammer bits is the most economical option for rocky places.
To make a list of our top picks, we conduct extensive research and pour our blood, sweat, and tears into the process. After concluding the research phase, we finally crafted a user-friendly article on our recommended products and useful information to help homeowners to make the right purchase.
FAQ about Jack Hammers Bits
Q1- What Type Of Oil is Used For Jack Hammer Bits?
It’s recommended to use 46-Hydraulic oil.
Q2- What Type of Material Jack Hammer Bits Are Made Up Of?
Jackhammer bits are made up of hardened medium carbon alloy steel.
Q3- What Kind of Steel is Used In Jack Hammer Bits?
For jackhammer bits and heavy punches, S-grade tool steel is ideal for standing up to constant high impact. S-grade alloys have a high impact resistance due to a combination of silicon, chromium, and tungsten.
Q4- Can You Sharpen Jackhammer Bits?
Yes, you can sharpen the jackhammer bits, but they can lose their hardness properties if you remove too much material. It’s ideal for cutting off the damaged tip and doing the heat treatment again after forging and normalizing it. But you’ve to do your best endeavor to get the result unless you’re doing this on a large scale.